Product Details:
Minimum Order Quantity | 1 Bag |
Usage | For Paver Blocks Maufacturing |
Packaging Size | 25 Kgs |
Packaging Type | Beg |
Color | Red, Yellow |
Additional Information:
Product Details:
Minimum Order Quantity | 200 Kilogram |
Usage | To Make Foam |
Packaging Size | 200 |
Packaging Type | Drum |
Additional Information:
Product Details:
Minimum Order Quantity | 225 Kilogram |
Form | Liquid |
Usage | Paver Blocks Manufacturing |
Grade Standard | Industrial Grade |
Additional Information:
Product Details:
Minimum Order Quantity | 225 Kilogram |
Grade Standard | Chemical Grade |
Packaging Type | Bag |
Brand | BRICK BOND |
1. Reduce cost of fly ash bricks and paving blocks production.
2. Achieve specific concrete properties more effectively
3. Ensure quality of your fly ash bricks and paving blocks during mixing, transporting, placing, and curing in adverse weather condition
4. Overcome emergencies during operations
Brickbond set accelerator admixture for fly ash bricks used to reduce the time required to develop final strength characteristics in concrete products. Brickbond set accelerator admixture for fly ash bricks possible reasons for using
1. Reduce the amount of time before finishing operations begin
2. Reduce curing time
3. Increase rate of strength gain
4. Offset effect of cold weather
Brickbond accelerates, water-proofs, strengthens, hardens, densifies your fly ash bricks, paving blocks and all concrete products. Brickbond raises the temperature of the mix, and its accelerating action on the setting creates heat. Port- land cement or lime and gypsum gauged by the solution of brickbond attains greater strength in 48 hours than a corresponding mixture with plain water attains in 7 days. Think what this means! Cutting more than half the time for stacking or de-moulding your fly ash bricks, paving blocks and other concrete products in stacking yard for curing. With brickbond, finishing is possible within a short time after making the products.
The early strength given to freshly produced fly ash bricks or concrete products prevents from breakage of corners and edges. it increases the crushing, tensile and abrasive strength. It gives your bricks ‘beauty and life".
The final set and strength of your products are in no way affected by the use of brickbond. In fact, tests indicate the final strength is increased by its use.
Concrete products can be made easier, cheaper and better by using brickbond. Brickbond will help overcome the disadvantages of cold weather, increase the output of your plant, and improve the quality of your products all the year round. With brickbond your products will show a higher polish, owing to the density and smoothness which it gives to them. Four percent of brickbond cost about rs30/-, and used as directed with each bag of cement will: half the time of setting. Double the output of a plant having limited floor space. Increase the early strength so blocks can be handled in half of the usual time. Prevent a large part of the loss from breakage. Lower the freezing point of the mixture so work can be done in cold weather without injury if properly handled.
Shorten the time that forms are tied up. Save time in the steam room and often render it unnecessary. Add but little to the cost of the mix, but save tremendously in time and space, besides improving the quality of the product and increasing profits.
Product Details:
Minimum Order Quantity | 225 Kilogram |
Quantity Per Pack | 200 |
Packaging Type | Drum |
Additional Information:
Product Details:
Minimum Order Quantity | 200 Kilogram |
Physical State | Liquid |
Usage | Industrial |
Packaging Size | 200 Kgs |
Packaging Type | Drum |
Grade Standard | Technical Grade |
Additional Information:
Product Details:
Minimum Order Quantity | 200 Litre |
Color | Transparent |
Additional Information:
3.9/5
Rated by 8 Users